LED SIGN CABLE Specification:

Secondary wiring (Power source to Channel Letters) for LED signage is to be ReLight America’s “LED SIGN CABLE”. The letters are to be wired per installation instructions, LCL (letter through wall), LJL (letter to letter jumps and LTL (transformer to letter) using lengths that are as short as possible. Where LCL wires are connected to the Channel Letter, metal to metal contact must be maintained. Splice connections between LTL, LJL, and LCL should be finger tightened only. It is important that when the Power Supply is placed in the listed metal enclosure that the enclosure is grounded to the primary ground.