Dry Locations:

1)  Pull off lid with pliers at arrows, attach to wall by bolting or screwing through the two mounting tabs.
2)  Attach 1/2" trade size conduit and fittings or Neon Power Pro Neon Sign Cables to box through provided holes and tighten locknuts against bonding plate.
3)  Strip back wire to expose 1" of copper, twist wires together, loop around post between cupped washer and nut, tighten nut.
4)  Snap on cover.

Wet Locations:

1)  Mount box on wall at least 12" from the floor with fittings facing down.
2)  If Neon Sign Cables are used, do not strip within 4" of ground shield or within 2" in dry location.
3)  Use liquid-tight conduit fittings for conduit, and sealing rings if using Neon Sign Cable.

SEE INSTALLATION INSTRUCTIONS FOR COMPLETE DETAILS

If you would like a printed version of our Installation Instructions,
use our request form.